MATERIAL TRANSPORT SYSTEMS
A COCHLE FOR ABRASIVES AND POWDERS
This system enables the transport of material with very reduced dimensions.
Designed for any length and for capacities up to 4000 kg per minute.
Equipped with gear motor control.
Constructed with or without screen for slag separation.
Propellers and channels built with high resistance material.
WITH CHAINS AND SCRAPERS
This chain recovery system with scrapers has been designed to have the foundations limited up to -345 mm below the ground floor.
Mostly installed in manual and automatic chambers for abrasive recovery.
The guides are made of special materials and it has high-strength, hardened and tempered chains.
Equipped with automatic chain tensioner.
Designed for any type of length and width.
WITH HORIZONTAL ROLLERS
Transport conveyors with horizontal rollers can be standard modular or designed for any size and capacity.
Roller motorization by chain.
It is also designed to hold side conveyors.
WITH STEEL SHUTTERS
The roller shutter conveying lines are mainly used in heavy industry where the castings can fall from a certain height without damaging the structure.
It also transports hot castings.
Equipped with control gear motor and inverter, if required.
FOR LOADING AND UNLOADING TUBES
This system is particularly suitable for the transport of pipes by means of biconical rollers.
The loading on these rollers may be automatic and with the help of special levers controlled by a pneumatic or hydraulic system.
Unloading can be automatic with storage of pieces on fixed benches.
